ZenaDrone Homepage

Menu
Header
Menu
Facebook-f Twitter Linkedin-in Youtube Instagram
Menu
Header
Menu
Menu
Menu
Header
Menu

How to Choose a Hydraulic Internal Gear Pump?

Choosing a Hydraulic Internal Gear Pump is not a simple catalog exercise. The right model must match pressure, speed, fluid viscosity, temperature, and available installation space. A pump that performs well on a test bench may struggle in a dusty steel mill or a mobile machine exposed to cold starts.

Hydraulic author and engineer Anthony Esposito offered a useful reminder: “The pump is the heart of a hydraulic system.” That idea matters here. A weak selection can create excessive noise, unstable flow, heat, shaft wear, and premature seal failure. The symptoms may appear elsewhere, but the pump often deserves careful attention.

Look beyond maximum pressure. Check continuous operating pressure, peak pressure, displacement, volumetric efficiency, and recommended speed range. Confirm the fluid’s viscosity at both startup and operating temperature. Examine port size and position. Small details matter.

So does filtration.

A reliable choice also considers drive torque, mounting accuracy, inlet conditions, and replacement-parts availability. Internal gear pumps are valued for smooth delivery, compact construction, and strong low-speed performance. However, they are not automatically ideal for every hydraulic circuit. That assumption can be wrong.

Real-world experience should influence the decision. Review service records, inspect contamination levels, and ask how the machine actually operates. Manufacturer data remains essential, but field conditions can expose limitations that brochures do not show. This guide explains how to compare pump specifications, recognize hidden trade-offs, and select a Hydraulic Internal Gear Pump with greater confidence. Some uncertainty will remain. Good engineering acknowledges it and verifies the choice before full-scale installation.

How to Choose a Hydraulic Internal Gear Pump?
Table of Contents [Hide]
1 Hydraulic Internal Gear Pump Basics and Operating Principles
2 Define Flow, Pressure, Speed, and Fluid Requirements
3 Compare Pump Displacement, Efficiency, and Material Options
4 Check Compatibility with the Hydraulic System and Installation
5 Evaluate Reliability, Maintenance Needs, and Total Cost

Hydraulic Internal Gear Pump Basics and Operating Principles

How to Choose a Hydraulic Internal Gear Pump?

A hydraulic internal gear pump uses an inner rotor, outer gear, and crescent-shaped seal. As the gears rotate, teeth separate near the inlet and create expanding cavities. Oil fills these cavities. The rotating gears then carry oil around the housing toward the outlet. Mesh contact reduces the cavity volume and raises pressure. Simple movement. Precise control.

ISO 4409:2019 identifies flow, pressure, speed, temperature, and efficiency as key pump test variables. These factors should guide pump selection, not catalogue pressure alone. Published engineering data commonly places volumetric efficiency near 85–95% under suitable conditions. Overall efficiency may fall toward 70–90% as pressure, viscosity, leakage, and friction increase. A pump running at 1,500 rpm with clean oil may behave differently at 2,000 rpm in a cold workshop.

Check the application’s continuous pressure, peak pressure, flow demand, oil viscosity, and shaft speed. Internal gear pumps usually offer quiet operation and strong low-speed performance. Their compact design suits lubrication circuits, mobile equipment, and industrial power units. However, excessive contamination can damage clearances quickly. ISO 4406 cleanliness ratings help define acceptable fluid conditions. I would also verify inlet conditions carefully; poor suction can cause noise, cavitation, and unstable flow. One overlooked detail. Temperature changes viscosity, and viscosity changes leakage. Selecting from a single operating point is convenient, but it may be the wrong assumption.

How to Choose a Hydraulic Internal Gear Pump?

Hydraulic Internal Gear Pump Basics and Operating Principles

An internal gear pump transfers hydraulic fluid from the inlet to the outlet as the inner and outer gears rotate. The theoretical flow is determined by displacement and speed, while actual flow is reduced by volumetric losses.

The chart shows calculated outlet flow for three displacement sizes at 90% volumetric efficiency: Flow (L/min) = Displacement (cm³/rev) × Speed (rpm) × 0.90 ÷ 1000. Final selection should also verify pressure rating, viscosity range, temperature, shaft speed, filtration, and fluid compatibility.

Define Flow, Pressure, Speed, and Fluid Requirements

How to Choose a Hydraulic Internal Gear Pump?

Start by defining the required flow, not by choosing a pump size. Flow determines actuator speed and depends on displacement and shaft speed. Calculate the needed litres per minute under real operating conditions. Include expected leakage, pressure losses, and motor efficiency. A pump that looks adequate on paper may deliver less flow when the oil becomes hot. This is often overlooked.

Pressure must be separated into continuous and peak values. Check the working pressure, relief-valve setting, and pressure spikes during starting or stopping. Then confirm the required speed range. Excessive speed can increase noise, wear, and aeration. Low speed may reduce output because internal leakage becomes more significant. I have found that testing at only one speed creates false confidence.

Tips: Record flow, pressure, speed, temperature, and viscosity during normal operation. Use measured data where possible. Guesswork is convenient, but it can be expensive.

Fluid requirements are equally important. Confirm viscosity at both cold start and operating temperature. Check compatibility with seals, housing materials, and internal surfaces. Dirty fluid can damage tight clearances, so filtration and cleanliness must match the pump’s limits. Also consider fluid density, additives, and potential water contamination. A small mismatch may cause difficult starting or shortened service life. Recheck the calculations after installation, because actual system behavior may challenge the original assumptions.

Compare Pump Displacement, Efficiency, and Material Options

How to Choose a Hydraulic Internal Gear Pump?

Pump displacement determines how much fluid moves per revolution. A larger displacement can produce more flow at lower speed, but it may increase torque demand and startup load. Match displacement with the required flow, motor speed, and operating pressure. A small pump running too fast may create noise, heat, and premature wear. A larger pump is not automatically better.

Efficiency deserves a closer look. Volumetric efficiency reflects leakage through clearances, while mechanical efficiency reflects friction between gears, bushings, and seals. High-viscosity fluid can improve sealing but also increase friction during cold starts.

In field evaluations, oil temperature often reveals problems that catalog figures miss. Measure flow at actual pressure and temperature. The test setup may still be imperfect. That is worth admitting.

Tips: Check fluid compatibility before choosing materials. Cast iron suits many general hydraulic systems. Steel components can handle demanding loads. Stainless steel helps resist corrosion, while bronze or specialized bearing materials may support cleaner, lower-friction operation. Consider water content, additives, temperature, and contamination. A material that performs well in clean oil may fail quickly in abrasive service. Verify clearances, seal materials, and shaft loading with the manufacturer’s technical data. Small details matter.

Check Compatibility with the Hydraulic System and Installation

Choosing a hydraulic internal gear pump starts with system compatibility, not catalog size. Match displacement, flow, pressure, speed, and fluid viscosity to the circuit’s real operating range. A pump rated for peak pressure may still struggle with continuous duty. Confirm inlet conditions carefully. Long suction lines, undersized hoses, and cold oil can create cavitation, noise, and premature wear. I have seen installation assumptions cause more failures than pump defects.

Before mounting, compare shaft alignment, rotation direction, port positions, and coupling dimensions. Keep the pump close to the reservoir when possible. Use clean, correctly rated hoses, and support them without forcing the housing to carry pipe stress. Flush the system before connection. Even small welding debris can damage internal surfaces. Prime the pump with compatible fluid, then start at low speed. Check pressure, temperature, and leakage. A pressure gauge near the outlet can reveal restrictions that a remote gauge may hide. Do not trust a quiet start alone. Some faults appear after warming.

Tips: Record actual flow and pressure during the hardest machine cycle. Check oil temperature after thirty minutes. Leave room for filter service and shaft inspection. Recheck alignment after the first operating period. Also question the original pump size. It may have been selected for an ideal condition that never exists.

How to Choose a Hydraulic Internal Gear Pump? - Check Compatibility with the Hydraulic System and Installation

Selection Dimension Recommended Check Typical Reference Range Why It Matters Compatibility Result
Required Flow Rate Match pump displacement and rotational speed to the system flow requirement. Calculate flow using: Q = displacement × speed × volumetric efficiency. Insufficient flow reduces actuator speed; excessive flow can increase heat generation and pressure losses. Flow should meet the design requirement without continuous oversizing.
Operating Pressure Compare continuous and peak system pressure with the pump ratings. Many industrial internal gear pumps operate approximately from 100 to 250 bar, depending on design and speed. Running above the continuous rating may shorten bearing, shaft, seal, and gear life. Select a pump with a continuous rating above the normal working pressure.
Pump Displacement Choose displacement according to desired flow, available shaft speed, and motor size. Common industrial sizes may range from approximately 5 to 250 cm³/rev. A suitable displacement prevents excessive speed, torque demand, or inefficient throttling. Verify displacement against both flow and drive limitations.
Rotational Speed Confirm minimum, nominal, and maximum allowable speed for the selected fluid and pressure. Typical operating speeds are often approximately 500–2,000 rpm; consult the specific pump curve. Low inlet pressure or excessive speed can cause cavitation, noise, and premature wear. The full speed range must remain within the pump performance envelope.
Hydraulic Fluid Check fluid type, viscosity, additives, cleanliness, and material compatibility. Mineral hydraulic oils commonly operate around 15–46 cSt at working temperature. Viscosity that is too low increases leakage; viscosity that is too high raises inlet losses and starting torque. Fluid viscosity and seal materials must be approved for the pump.
Inlet Conditions Check suction-line diameter, length, bends, tank level, and inlet pressure. Keep inlet pressure within the manufacturer’s specified range and minimize suction-line restriction. Poor inlet conditions can cause cavitation, vibration, reduced flow, and accelerated gear wear. Use a short, adequately sized suction line with secure, air-tight connections.
Mounting Orientation Confirm whether the pump can be mounted horizontally, vertically, or in another specified position. Follow the pump installation drawing for allowable orientation and housing drainage requirements. Incorrect orientation may prevent lubrication, increase seal loading, or trap air inside the housing. Mount only in an approved orientation.
Shaft and Coupling Match shaft diameter, key or spline profile, rotation direction, alignment, and torque capacity. Allowable torque depends on displacement, pressure, shaft design, and service factor. Misalignment and torsional overload can damage the shaft, bearings, coupling, and mounting face. Use a correctly sized flexible coupling and verify shaft alignment.
Port Size and Connection Match port type, thread standard, nominal size, flow direction, and hose pressure rating. Common connection standards include metric, BSP, SAE, and flange arrangements. Incorrect connections may leak, restrict flow, or create unsafe pressure conditions. Connection dimensions and pressure ratings must match the system.
Filtration and Cleanliness Provide suitable suction and return filtration and maintain clean assembly practices. Many hydraulic systems target ISO 4406 cleanliness levels around 16/14/11 to 18/16/13, depending on equipment sensitivity. Contamination accelerates wear and can reduce volumetric efficiency. Use filtration suitable for the pump and the complete hydraulic circuit.
Temperature Check minimum and maximum fluid temperature, ambient temperature, and cooling capacity. Many mineral-oil systems operate near 30–60°C, while allowable limits depend on seals and fluid. Excessive temperature reduces viscosity, degrades seals, and shortens fluid life. Keep operating temperature within the pump and fluid limits.
Noise and Vibration Review expected noise level and provide rigid support, proper alignment, and low-restriction piping. Actual noise depends on speed, pressure ripple, inlet conditions, mounting, and system resonance. Noise or vibration may indicate cavitation, air ingress, misalignment, or excessive pressure pulsation. Verify noise and vibration after commissioning under normal load.
Installation and Commissioning Fill the pump with compatible fluid, confirm rotation, bleed trapped air, and start at low pressure. Inspect for leaks, abnormal noise, temperature rise, and stable pressure during initial operation. Correct commissioning reduces dry-running damage and identifies installation errors early. Complete a documented start-up inspection before full-load operation.

Evaluate Reliability, Maintenance Needs, and Total Cost

How to Choose a Hydraulic Internal Gear Pump?

Evaluate Reliability, Maintenance Needs, and Total Cost

Reliability starts with the operating conditions, not the catalog price. Check pressure, speed, fluid viscosity, temperature, and daily duty cycles. A pump handling cold, thick oil needs different clearances than one running warm hydraulic fluid. Ask for test data at your actual conditions. General performance charts can hide important limitations.

Maintenance details often decide whether a pump earns its place on the machine. Look for accessible seals, replaceable wear parts, and clear inspection procedures. Good filtration protects the gear teeth and bearings from abrasive particles. Monitor noise, casing temperature, and pressure fluctuations during operation. These small changes may reveal wear before an unexpected shutdown. Keep spare seals available. They are inexpensive insurance.

Total cost includes energy use, downtime, labor, replacement parts, and disposal work. A cheaper pump may consume more power or require frequent adjustment. That price can become misleading. In field evaluations, I have seen maintenance teams overlook installation alignment. The pump was blamed, although the coupling caused much of the vibration. This is worth remembering. Request service intervals, expected life data, and warranty terms in writing. Still, published life figures are not promises. Real results depend on fluid cleanliness, installation quality, and operator habits. Choose the pump that fits the complete operating picture, not just the lowest quotation.

Article Source:

Scroll to Top